WalAce® Guttering Profile
Profile installed in horizontal direction forming guttering in the WalAce® EIFS at the Windows/ Doors/ Façade edges. Its profile allows a correct evacuation of rainwater on the facade preventing its travel inwards and damaging the surface.
Additional information
Technical Caracteristics
PVC profile with anti alkali fibreglass mesh.
Advantages and Uses
- Leave a 2-3 mm separation distance between the profiles.
- Once the profile has been positioned, leave it to dry for a minimum of 24 hours.
Application Procedure
- Apply a coat of WalAce mortar on the two surfaces forming the corner.
- Next position the profile over the mortar and press gently.
- With the help of a level, correctly position the profile. Cover the upper face of mesh with mortar.
Recommendations
- Leave a 2 - 3 mm separation distance between the profiles.
- Once the profile has been positioned, leave it to dry for at least 24 hours.
Packaging and Storage
Box : 2.5m each X 10 pieces
Profile Box to be stored horizontally.
Technical data
(Results obtained in laboratory under standard conditions)
| Composition | PVC and Fibreglass with anti-alkali treatment. |
| Approx | Weight. 0.20 kg/m |
| Profile length | 2.5 m |
Legal Disclaimer
The instructions for use are given according to our tests and knowledge and do not imply any commitment by PIDILITE GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
PIDILITE GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of PIDILITE GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by PIDILITE GRUPO PUMA´s products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.
PIDILITE GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of PIDILITE GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by PIDILITE GRUPO PUMA´s products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.